- 41-bottle capacity
- Dual temperature zones
- Undercounter installation
The Dacor DRW24G7500APDA is a current 24-inch undercounter wine cellar, panel-ready. Dacor lists the DRW24G7500APDA as a 24-inch undercounter wine cellar, panel-ready. Dacor did not market the DRW24G7500APDA's platform under one of its named design collections in the sources behind this page, so no collection claim is made for it here. What a technician actually finds on the DRW24G7500APDA matches its listed features: 41-bottle capacity; Dual temperature zones; Undercounter installation. One part of the DRW24G7500APDA's model number is reliably decodable: the digits straight after the prefix letters (24) give the nominal size in inches, which is consistent across Dacor's current SKUs — Dacor has never published a full legend for the rest of the string, so nothing past that and the LAP/RAP hinge letters should be treated as confirmed. The DRW24G7500APDA's exact plate location has not been confirmed from a primary Dacor document, so a door edge, a door frame, or an interior wall are the three places worth checking, with a photograph taken once the plate is found rather than assumed in advance. The recurring repair points on wine refrigeration like the DRW24G7500APDA are the compressor and its start relay, the evaporator fan, and the door gasket, since a cellar depends on a tight seal to hold its narrow temperature band. What typically fails on a unit built like the DRW24G7500APDA is the compressor, a fan that circulates air between the zones, or interior LED lighting that has stopped illuminating the racks. On a wine column like the DRW24G7500APDA, the common calls are a compressor or fan issue affecting one zone but not the other, and a door gasket that has lost its seal. A service visit on the DRW24G7500APDA begins with a direct temperature and humidity check per zone, then the door seal, before the compressor itself is ever suspected. There is no error-code table for the DRW24G7500APDA anywhere in Dacor's own documentation for this appliance type; that absence was verified by reading the manual, not assumed from silence. What the DRW24G7500APDA does show, inside the SmartThings app rather than on the unit itself, is a set of named alarms: Self Check, Abnormally High Temperature, Door Opening, and a Filter Replacement reminder — plain-language alerts, never a code string. Whatever a repair-blog site claims a Dacor wine column like the DRW24G7500APDA can display as a code, the primary manual's alarm section lists only four named conditions and never a coded string — the online tables are contradicted by Dacor's own documentation. Dacor has operated as a wholly owned subsidiary of Samsung Electronics America since the September 2016 acquisition closed, and the DRW24G7500APDA's control platform reflects that ownership. The DRW24G7500APDA is a product of a brand with real history: Pasadena, California, 1965, three generations of family ownership, and then a September 2016 acquisition that made Dacor a wholly owned Samsung Electronics America subsidiary while it kept its own name and dealer network. Getting the DRW24G7500APDA repaired correctly starts with correctly identifying it — model number, generation, and platform — rather than assuming a code, a part, or a symptom seen on a different Dacor appliance carries over automatically.
A DRW24G7500APDA holds temperature to a tight tolerance, which is the whole point of it — and it shows no error code, only named alarms in the app. The diagnosis for a DRW24G7500APDA is in our repair guides; the other units in its family are in the model directory; the original spec is at www.dacor.com.
