Two eras, two separate code languages
A Dacor appliance built before the 2016 Samsung acquisition speaks in Dacor’s own Legacy control-board language; one built after speaks in a different, Samsung-influenced language instead. The two never share a single code string, and neither one is universal across every category — some Dacor appliances display a genuine code, one is message-only and discontinued, and seven publish nothing at all. This page maps what each of the twelve Dacor categories actually reports, and every type carries its own detailed breakdown inside the error-codes library.
The four categories with a real code to read
A wall oven shows a short Legacy F0-through-F8 code on a Classic ERC board, or a Samsung-era Modernist C-code instead. A range is the most complex of the four: it can share that same Classic F0-through-F8 table, or run its own separate ER30D/ER36D/ER48D F-code list whose F1, F2, and F3 mean something different from the Classic ones despite matching digits, or answer in the Samsung-era C-code scheme. A cooktop’s Samsung-era induction table is fully verified from Dacor’s own manual, while a set of Legacy cooktop F-codes circulating online is uncited and appears to be the wall-oven table relabeled. A dishwasher runs a Legacy F-dash scheme or a Samsung-era letter scheme, two of whose codes are exact matches to Samsung’s own published dishwasher codes.
The one platform that never used codes, and is gone
The built-in coffee system never displayed an alphanumeric code in either revision it was sold in; every condition appeared as a full-sentence message such as a flow-meter or temperature alert. Dacor has since dropped the category from its current lineup entirely, with no successor model taking its place, so anyone still running one is servicing a discontinued platform rather than a current product.
Seven categories with a verified absence of codes
A rangetop, a range hood, a microwave, a refrigerator, a freezer, column refrigeration, and wine refrigeration give no error code whatsoever in the primary Dacor documents we reviewed. Where a Samsung-era model connects to SmartThings, the app surfaces four named alarms — Self Check, Abnormally High Temperature, Door Open, and Filter Replacement — as plain-language alerts, never as a code on the unit itself. Repair-blog sites publish invented code tables for every one of these seven categories, and each type’s own page names the fabricated strings only to say plainly that Dacor documents none of them.
How our technicians confirm the platform first
Before quoting any fix, our technicians read the model and serial number off the appliance itself, place it on the correct side of the 2016 acquisition line, and only then open the matching code table or symptom checklist. That order matters because a single digit sequence can point to entirely unrelated hardware depending on which board produced it, and treating a code as universal is the single fastest way to send a repair down the wrong path. We keep both the Legacy and the Samsung-era references on hand for every code-bearing category, and we keep the plain-English symptom lists for the seven categories that publish none.
Why the platform matters more than the number
One number can mean entirely different things on different Dacor boards — F1 flags a different problem on a Classic oven than it does on an ER-series range, and neither matches a Samsung-era C-code. Pinning down the exact platform before a fix is quoted is the real task, and it is why our technicians confirm the model and serial first. Begin with the type breakdown above, then schedule your repair.