What Lights Out Fan Working means on your Dacor range hood (dacor range hood lights not working)
This describes a range hood symptom, not a Dacor error code, because Dacor never defined a code for it. Dacor’s manual lists “Light(s) not working” as its own line item under Problem / Cause / Solution, separate from fan problems, because the fan and light circuits are wired independently on most hoods. That separation is good news for troubleshooting: the fan working normally rules out a whole-hood power problem.
Symptoms
The point of the list below is to stop you replacing the wrong part of a range hood, because Lights Out Fan Working imitates other Dacor range hood problems closely.
- The fan runs at every speed normally, but one or both lights stay dark.
- A light flickers briefly before going out rather than failing instantly.
- The light switch or button gives normal tactile or audible feedback with no light response.
- Only one of two lights is affected, with the other working normally.
Common causes
More than one thing can produce Lights Out Fan Working on a range hood, so the causes below are ordered by how often they turn out to be responsible on a Dacor range hood.
- Burned-out bulb — the simplest and most common cause, especially if only one of two lights is affected.
- Bulb not seated correctly — a bulb reinserted slightly off its base after cleaning will not make contact.
- Failed light switch — the separate switch controlling the light circuit has failed while the fan switch remains fine.
- Loose or damaged wiring to the light fixture — a connector behind the fixture has come loose over time.
Troubleshooting steps you can try
These are the checks an owner can safely make on a Dacor range hood: stop at the first one that asks you to touch live voltage, gas, or a sealed system inside the range hood.
- Replace the bulb with a new one of the correct type and wattage specified for the fixture.
- Reseat the existing bulb fully if a new bulb is not immediately on hand.
- Test the light switch or button by listening or feeling for its normal click.
- Check whether the second light (if equipped) works normally, to isolate the problem to one fixture.
- Book a technician if a fresh bulb does not resolve it, since the fixture wiring or switch may need testing.
Parts a technician may replace
Diagnosis on your Dacor range hood usually points at the light bulb, light switch, and wiring harness. Nothing is ordered for the range hood until the failing part is confirmed on the range hood itself.
When to call a technician
This is usually a bulb-level fix; a technician is only needed if a new bulb does not restore the light, pointing to the switch or wiring. This rates Low on a range hood, so take your time — but do not keep clearing Lights Out Fan Working on the range hood without finding out why. We service your range hood independently of Dacor, fitting genuine parts and standing behind the labor for 30 days.
Related help and Dacor resources
Once the Lights Out Fan Working condition has outlasted the owner-level checks, the range hood is a service call: book one, or read the other range hood problem pages. www.dacor.com holds the range hood data sheet.
