- Sealed gas burners
- Illumina illuminated knobs
- Natural gas / LP convertible
- Silver Stainless finish
The Dacor DTG36P875NS is a current 36-inch gas cooktop. Dacor lists the DTG36P875NS as a 36-inch gas cooktop in Silver Stainless, natural gas/LP convertible. A gas cooktop of this generation does not carry the same electronic information-code board as the induction models; its control is mechanical knobs and an electronic igniter module. The DTG36P875NS is part of Dacor's Transitional style, which Dacor's own copy describes as an interpretation of classic and modern styling inspired by elements found in commercial kitchens, blending Contemporary and Professional design cues. Day to day, what defines the DTG36P875NS is Sealed gas burners; Illumina illuminated knobs; Natural gas / LP convertible; Silver Stainless finish. On a model number like the DTG36P875NS, the 36 immediately after the prefix is the nominal size in inches — a pattern verified across dozens of real Dacor SKUs — but Dacor has not published an official decode for the rest of the string, so we do not guess at what any other letter position of the DTG36P875NS means. There is no independently confirmed rating-plate location for the DTG36P875NS or its appliance type, so the plate is usually found somewhere on a door edge, a door frame, or an interior wall — check those three spots and photograph the label before ordering parts. On a gas surface like the DTG36P875NS, the recurring calls are a spark igniter module that clicks but does not fire, a clogged burner port, or a gas valve that has stuck partially open or closed. The common failure points on the DTG36P875NS's gas platform are the igniter/spark module, burner ports fouled with spillover, and the mechanical gas valve behind each knob. What usually fails on a gas cooking surface like the DTG36P875NS is the electronic igniter module, a burner port blocked by boil-over residue, or a worn valve that will not hold a low simmer. A service visit on the DTG36P875NS starts with watching the ignition sequence directly — does the igniter spark, does the burner catch, how long does it take — before any valve or module is replaced. Unlike the induction cooktops in this lineup, the DTG36P875NS has no electronic information-code board behind its knobs — gas cooking surfaces of this generation are diagnosed the same way Legacy gas cooktops always were, from ignition and flame behavior rather than a displayed code. Do not assume the C0/C1/C2/F0/F1/F2 codes documented for Dacor's induction cooktops apply here; they belong to a different control architecture entirely. The DTG36P875NS was designed and built after Samsung Electronics America's September 2016 acquisition of Dacor closed, on a platform that reflects Samsung's involvement even though Dacor kept its own brand. The DTG36P875NS carries the history of the whole brand behind it: Dacor was founded in Pasadena, California in 1965 by Stanley Joseph, stayed family-owned for three generations, and became a wholly owned Samsung Electronics America subsidiary when the acquisition closed in September 2016. A repair on the DTG36P875NS goes faster when the exact model and, if available, the serial number are confirmed before parts are ordered, since Dacor's platforms diverge enough by generation that a close-but-wrong SKU can mean a part that does not fit.
The DTG36P875NS is a cooktop, not a rangetop and not a range — a distinction that decides which parts fit and which problems are even possible. Look through the model directory for the rest of the range, read the repair guides for the problem you are chasing, or check www.dacor.com for the original specification.
